休止モードからウェイクアップした後、SE2422HMに接続されているノートパソコンでPowerDVDがBlurayまたはDVDディスクを再生できない
Summary: 次の記事では、休止モードからウェイクアップした後に、SE2422HMモニターに接続されているノートパソコンでPowerDVDがBlurayまたはDVDディスクを再生できない場合の対応方法について説明します。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
PowerDVDは、休止モードからウェイクアップした後、SE2422HMに接続されているノートパソコンでBlurayまたはDVDディスクを再生できませんか?
HDMIからDVIケーブルまたはアダプターに接続されたSE2422HMモニターDVIポートに接続されているノートパソコンで、PowerDVDを使用してBluray/DVDビデオ コンテンツを視聴しているときに、ノートパソコンを休止モードにしてから再度起動した後、PowerDVDはBluray/DVDビデオを再生できません。HDCPエラー メッセージが表示されます(図。1)。 
(図1.HDCPエラー メッセージ)
影響を受けるプラットフォーム:
- Inspiron 3501
- Inspiron 7706
- Vostro 3500
Cause
失敗したHDCP認証が原因です。
Resolution
HDMIをDVIケーブルまたはアダプターに接続し直します。
Affected Products
Inspiron 3501, Inspiron 7706 2-in-1, Vostro 3500Article Properties
Article Number: 000188256
Article Type: Solution
Last Modified: 24 Apr 2025
Version: 6
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.