iDRAC9: How to test the Integrated Dell Remote Access Controller Email Alerts configuration
Summary:This article explains how to test the configured iDRAC email alerts settings.
Please select a product to check article relevancy
This article applies to This article does not apply toThis article is not tied to any specific product.Not all product versions are identified in this article.
Enable Domain Name System (DNS) Registration for iDRAC9 (for corporate network, this iDRAC must be registered on DNS).
Enable and configure email alerts.
Configure the email settings and destinations: Destination Email address - receiver email address and SMTP (Email) Server setting - Sender email address
Go to Configuration > System Setting > Alert Configuration > SMTP (Email) Configuration. Check the box to enable State with receiver email address then go to test email.
Successful test email sent:
Check the receiver mailbox to ensure receipt of the test email:
Go to Configuration > System Setting > Alert Configuration > Test Event (Example: CPU0000), click Test.
Check receiver mailbox again to ensure receipt of email alert: