Dell Unity: 6 veya daha yüksek katman değerine sahip NTP sunucularıyla senkronize olunamaz
Summary: Unity dizileri, 6 veya daha yüksek bir katman değerine sahip NTP sunucularıyla senkronizelenemiyor. Unisphere'de hiçbir hata görüntülenmez ancak Unity saati senkronize değildir.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Bu örnekte, NTP sunucusuna erişilebilir ancak Straiken değeri 6 olarak ayarlandığından Unity, sunucuyla senkronize olaamaz. Bu, komutun çıktısı
svc_ntp -i ile belirlenebilirsiniz; NTP sunucusu için satırın başında "*" sembolü yok.
06:40:01 service spb:~/user# svc_ntp -i NTP Status: remote refid st t when poll reach delay offset jitter ============================================================================== xxx.xxx.xxx.xxx LOCAL(0) 6 u 67 64 377 0.156 637.565 0.105 *peer 127.0.0.1 6 s 15 64 376 0.026 0.089 0.124 List of associations: ind assid status conf reach auth condition last_event cnt =========================================================== 1 45538 9024 yes yes none reject reachable 2 2 45539 961a yes yes none sys.peer sys_peer 1 List of servers in ntp.conf: server xxx.xxx.xxx.xxx iburst prefer Timestamps: hwclock:1667976004 systime:1667976004 uptime:434601.65 Detailed Timestamps: Wed Nov 9 06:40:05 UTC 2022 Wed Nov 9 06:40:06 2022 -0.953423 seconds 06:40am up 5 days 0:43, 6 users, load average: 112.37, 112.83, 113.09
Cause
Içinde
/etc/ntp.conf, ntpd'nin 6 veya daha yüksek bir katman değerine sahip NTP sunucularıyla eşitlenmelerini önleyen aşağıdaki satır bulunur.
tos orphan 6Resolution
- 5 veya daha küçük bir katman değeriyle yapılandırılmış NTP sunucularını kullanın.
10 dakika kadar bekleyin ve
svc_ntp -s ardından ntpd'nin NTP sunucusuyla senkronize olduğunu doğrulamak için komutu çalıştırın. Çıktıda NTP girişinin sol tarafında yıldız işareti, katman değeri (st) ise 5 veya daha küçük olmalıdır.
06:58:01 service spb:~/user# svc_ntp -i NTP Status: remote refid st t when poll reach delay offset jitter ============================================================================== * xxx.xxx.xxx.xxx LOCAL(0) 5 u 35 64 377 0.170 -0.123 0.041 peer 127.0.0.1 6 s 47 64 37 0.059 -637.13 0.102 List of associations: ind assid status conf reach auth condition last_event cnt =========================================================== 1 25293 961a yes yes none sys.peer sys_peer 1 2 25294 9014 yes yes none reject reachable 1 List of servers in ntp.conf: server xxx.xxx.xxx.xxx iburst prefer Timestamps: hwclock:1667977331 systime:1667977331 uptime:435927.21 Detailed Timestamps: Wed Nov 9 07:02:12 UTC 2022 Wed Nov 9 07:02:13 2022 -0.953428 seconds 07:02am up 5 days 1:05, 7 users, load average: 112.32, 112.49, 112.74
- Bu yöntem kök erişimi
/etc/ntp.confgerektiğinden, dosyayı düzenlemek ve aşağıdaki satırda değeri varsayılan 5'ten daha büyük olan destek katman değerleriyle değiştirmek için Dell Teknik Destek veya lisanslı servis sağlayıcınızla iletişime geçin.
tos orphan 6
Desteklenen maksimum değer 15'tir.
Örnek:
# cp /etc/ntp.conf /cores/service/user/ntp.conf.bak # sed -i -e 's/tos orphan 6/tos orphan 7/g' /etc/ntp.conf # diff /etc/ntp.conf /cores/service/user/ntp.conf.bak 86c86 < tos orphan 7 --- > tos orphan 6
Ardından şu komutu çalıştırın:
svc_ntp -s
Not: Bu
tos orphan değer, /etc/ntp.conf Unity OE yükseltmesinden sonra orijinal değere geri dön olabilir.
Not: Zaman farkı çok büyükse değişikliğin etkili olması için Depolama İşlemcisi'nin (SP) yeniden başlatılması gerekebilir.
Affected Products
Dell EMC UnityArticle Properties
Article Number: 000205159
Article Type: Solution
Last Modified: 09 Jun 2023
Version: 2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.