PowerProtect：重新調整大小或將磁碟新增至 VMware 虛擬機後，後續備份即為完整

Summary: 調整虛擬機磁碟大小或新增額外磁碟至虛擬機，將導致下一個備份成為完整備份。 使用 TSDM 進行備份。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

下列 VM 工作會導致下一個 PowerProtect Data Manager VM 備份，讓修改後的 VM 升級為「FULL」層級。

1.調整虛擬機磁碟大小。
2.將磁碟新增至虛擬機。

備份記錄中會顯示下列訊息： 
YYYY-MM-DDThh:mm:ss.482Z DEBUG:  [b179af117f17958a;bb51fa204e8a8389] SDM Data Mover: SDM Full Sync: Full sync is already required for 'Hard disk 3'.
YYYY-MM-DDThh:mm:ss.484Z NOTICE: [b179af117f17958a;bb51fa204e8a8389] SDM Data Mover: SDM Full Sync: 1 disks require full sync, but the full sync of a subset of disks is not supported in this release.
YYYY-MM-DDThh:mm:ss.484Z WARN:   [b179af117f17958a;bb51fa204e8a8389] SDM Data Mover: SDM Full Sync: 3 disk(s) require full backup.
YYYY-MM-DDThh:mm:ss.503Z DEBUG:  [b179af117f17958a;bb51fa204e8a8389] SDM Data Mover: SDM Full Sync: Created TSDM progress

Cause

此行為如設計而成。

Resolution

自 PowerProtect Data Manager 19.14 版起，不支援 VM 磁碟子集的 FULL Sync 功能。
此功能無法在即將推出的PowerProtect Data Manager 19.15版本中使用。
在未來的PowerProtect Data Manager 版本中將支援此功能。

Affected Products

PowerProtect Data Manager
Article Properties
Article Number: 000218848
Article Type: Solution
Last Modified: 23 Jan 2024
Version:  2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.