CLI에서 NetWorker Client 소프트웨어 인벤토리를 수행하는 방법
Summary: 이 작업은 각 클라이언트 시스템에 개별적으로 로그인하거나 타사 소프트웨어를 사용하지 않고 NetWorker Server에서 직접 수행할 수 있습니다.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
아래 명령은 다음 순서로 실행해야 합니다.
1단계:
nsrpush -i -all
이렇게 하면 모든 클라이언트에서 인벤토리가 수행됩니다. 이는 "-all" 옵션 대신 클라이언트 이름만 사용하여 특정 호스트로 제한될 수 있습니다.
성공적인/실패한 인벤토리 작업에 대한 로그는 NetWorker Server의 아래 위치와 함께 NetWorker-Installation-Path\nsr\logs\clientpush\
Step 2의 오류 문제를 해결하는 오류
메시지와 함께 찾을 수 있습니다.
nsrpush -s -t -all > output.txt
각 클라이언트에 설치된 모든 NetWorker 패키지를 표 형식으로 나열하고 출력을 "output.txt" 파일로 전달합니다. 이는 "-all" 옵션 대신 클라이언트 이름만 사용하여 특정 호스트로 제한될 수 있습니다. 
Additional Information
nsrpush에서 제공하는 추가 옵션에 대한 자세한 내용은 "Dell NetWorker 명령 참조 가이드"에서 확인할 수 있습니다.
Affected Products
NetWorkerArticle Properties
Article Number: 000220483
Article Type: How To
Last Modified: 16 Dec 2023
Version: 1
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.