MFE SCF: R21'den R2'ye basamaklı ortamda DEV, EXPAND komutu işleme sorunları SCF0463E hatasına neden oluyor

概要: DEV, EXPAND, R21->R2 bağlantı durumunu ve basamaklı SRDF ortamında R2 boyutunu yoksayın.

この記事は次に適用されます： この記事は次には適用されません： この記事は、特定の製品に関連付けられていません。 すべての製品パージョンがこの記事に記載されているわけではありません。
他のリソースを確認する

現象

Basamaklı SRDF ortamında DEV, EXPAND komutu R21->R2 bağlantı durumunu ve R2 aygıt boyutunu yok sayar ve genişletme isteği gönderir ve bu da genişletme hatasına şu mesajla neden olur:        
                                             
SCF0463E Device symdv# srdfgrp failed expansion due to Symmetrix Aborted Expansion        
                                

原因

Bu, bir yazılım sorunundan kaynaklanmaktadır.

解決方法

Kalıcı Çözüm: 
  • Ana Bilgisayar Etkinleştirme 8.5 için PTF SF85096, sorunu düzeltmek üzere geliştirilmiştir. Dell Çevrimiçi Destek'den indirilebilir.
  • Ana Bilgisayar Etkinleştirme 8.4 için PTF SF84152, sorunu düzeltmek üzere geliştirilmiştir. Dell Çevrimiçi Destek'den indirilebilir.
  • Ana Bilgisayar Etkinleştirme 8.3 için PTF SF83204, sorunu düzeltmek üzere geliştirilmiştir. Dell Çevrimiçi Destek'den indirilebilir.

その他の情報

PTF kapağı notu:  
++PTF(SF85096) REWORK(2021333) .                                 
++VER(Z038) FMID(SSCF850)                                        
   /*                                                             
*-------------------------------------------------------------   
* PROBLEM DESCRIPTION(S):                                        
* ------------------------------------------------------------   
* PROBLEM FIXED: OPT 591884                                       
* USERS AFFECTED: DVE users                                      
* PROBLEM DESCRIPTION: DEV,EXPAND ignores the R21->R2 link       
*                      status and the R2 size in the cascaded    
*                      SRDF environment                          
* DESCRIPTION DETAIL:                                            
*                                                                
* In the cascaded SRDF environment the DEV,EXPAND command        
* ignores R21->R2 link status and R2 device size and sends the   
* expansion request which causes the expansion failure with      
* the message:                                                   
* SCF0463E Device symdv# srdfgrp failed expansion due to          
* Symmetrix Aborted Expansion.                                   
*                                                                
* PROBLEM RESOLUTION:                                            
*                                                                
* The DEV,EXPAND command has been updated to check the link      
* status and the device size and block the expansion request     
* if it is necessary.                                             
*                                                                
* MODULES: ESFEXCMD                                              
*                                                                
* ------------------------------------------------------------   
* SF85096 29 Nov 2021 17:08:08                                   
* ------------------------------------------------------------   
*  OPT Summary                                                   
*  The following OPT was addressed by this PTF:                  
*                                                                
*    591884                                                      
*                                                                
*-------------------------------------------------------------

SCF0463E

Device symdv# [RDFG srdfgrp] failed expansion due to reason
Cause
The indicated device cannot be expanded due to the reason described in reason. If the failing device is in an SRDF relationship with the device specified in your DEV,EXPAND command, it is shown as symdv# RDFG srdfgrp where srdfgrp is the SRDF group of the device.

対象製品

Mainframe Enablers
文書のプロパティ
文書番号: 000196302
文書の種類: Solution
最終更新: 21 7月 2023
バージョン:  3
質問に対する他のDellユーザーからの回答を見つける
サポート サービス
お使いのデバイスがサポート サービスの対象かどうかを確認してください。