MFE zDP: QUERY komutu için yanlış RC. Yeni mesaj EIP0287W/E kullanıma sunulur

概要: QUERY komutu için yanlış RC

この記事は次に適用されます： この記事は次には適用されません： この記事は、特定の製品に関連付けられていません。 すべての製品パージョンがこの記事に記載されているわけではありません。
他のリソースを確認する

現象

TGT'deki PowerMax sistemlerinden biri çevrimdışı olduğunda QUERY TGT, STATUS, DEVICE komutu RC=0 döndürür.   
  
VDG, PowerMax sisteminden silinen aygıtlar içerirken QUERY VDG komutu RC=0 döndürür.    

zDP Definition Utility, MAX_RC ve uyarı/hata mesajı önem derecesine göre son dönüş kodunu ayarlamak için güncelleştirildi.
                                               
Bir PowerMax sistemindeki bir aygıt yoksa QUERY çıktıındaki aygıt girişi "*" ile işaretlenir.       
A new message will also be issued:                           
EIP0287W/E VDG , SYMM , some devices were not found on the controller 

原因

Bunun nedeni bir yazılım sorunudur.

解決方法

Kalıcı çözüm: 
  • Ana Bilgisayar Etkinleştirme 8.5 için PTF SF85107, sorunu düzeltmek üzere geliştirilmiştir. Dell Çevrimiçi Destek'den indirilebilir.

その他の情報

PTF kapağı notu: 
  
++PTF(SF85107) REWORK(2021333) .                               
++VER(Z038) FMID(SSCF850)                                      
      PRE(                                                     
          SF85068 SF85084                                       
          )                                                    
   /*                                                          
*------------------------------------------------------------- 
* PROBLEM DESCRIPTION(S):                                       
* ------------------------------------------------------------ 
* PROBLEM FIXED: OPT 590911 585747                             
* USERS AFFECTED: zDP users                                    
* PROBLEM DESCRIPTION: Incorrect RC for the QUERY command      
* DESCRIPTION DETAIL:                                          
*                                                              
* The QUERY TGT,STATUS,DEVICE command returns RC=0 when one    
* of the PowerMax systems in TGT is offline.                    
* The QUERY VDG command returns RC=0 when the VDG contains     
* devices that have been deleted from the PowerMax system.     
*                                                              
* PROBLEM RESOLUTION:                                           
*                                                              
* zDP Definition Utility has been updated to set final return  
* code based on the MAX_RC and the warning/error message       
* severity.                                                     
* If a device doesn't exist on a PowerMax system, the device   
* entry in the QUERY output will be marked with a '*'.         
* A new message will also be issued:                           
* EIP0287W/E VDG , SYMM , some       
* devices were not found on the controller                     
*                                                               
*                                                              
* MODULES: EIPINIT                                             
*          EIPMTBL                                             
*                                                               
* ------------------------------------------------------------ 
* SF85107 29 Nov 2021 12:03:35                                 
* ------------------------------------------------------------ 
*  OPT Summary                                                  
*  The following OPTs were addressed by this PTF:              
*                                                              
*    585747  590911                                            
*                                                               
*------------------------------------------------------------- 

対象製品

Mainframe Enablers
文書のプロパティ
文書番号: 000196303
文書の種類: Solution
最終更新: 22 7月 2023
バージョン:  4
質問に対する他のDellユーザーからの回答を見つける
サポート サービス
お使いのデバイスがサポート サービスの対象かどうかを確認してください。