PSQN: iDRAC9 Set up Menu Error While Saving Simple User Password

概要: PowerEdge server end users may encounter a critical error within the Dell iDRAC9 Human Input Interface (HII) menu when saving a simple user password.

この記事は次に適用されます： この記事は次には適用されません： この記事は、特定の製品に関連付けられていません。 すべての製品パージョンがこの記事に記載されているわけではありません。
他のリソースを確認する

現象

PowerEdge server end users may encounter a critical error within the Dell iDRAC9 Human Input Interface (HII) menu when saving a simple user password. The server F2 System Setup menu allows end users to perform at the box iDRAC9 configuration. Within the iDRAC Settings >> User Configuration menu, the UserID2 (root) account password can be modified. When attempting to input a simple password (for example: calvin), a critical error banner may be displayed while saving configuration changes.
 
System Setup Critical Error Example:

iDRAC9 HII Critical Error
 

Critical | Saving Changes
An error occurred. One or more settings may not be saved.
 
Technical Information:
An error occurs when the forms browser routes configuration to driver.
Return code from driver: 0x1A (Security Violation)
FormSet Title: iDRAC Settings
Storage Name: iDRAC_HII_IfrNVData
Form Title: User Configuration
Question Prompt: User Name
Block Name: &OFFSET=2411&WIDTH=0020

原因

By default, the iDRAC9 enforces a password policy blocking simple passwords. When the iDRAC9 password strength policy is defined for any option other than 'No Protection', a simple password phrase cannot be saved through any iDRAC interface. The System Setup HII menu does not contain a clear message error banner to define this error occurrence.

解決方法

The iDRAC9 System Setup menu does not provide an option to redefine the password protection policy to 'No Protection'. The user-defined password must meet the defined password policy for the iDRAC9. Inputting a password that meets the minimum password policy score does not lead to this critical error.  
 
Local RACADM commands can be leveraged from within the HOST Operating System of the server to determine the minimum password policy score requirements.
  
racadm>>racadm get idrac.security.minimumpasswordscore
[Key=idrac.Embedded.1#Security.1]
MinimumPasswordScore=Weak Protection
 
Also, local RACADM commands can be leveraged to modify the iDRAC9 minimum password policy score requirement, or modify the UserID2 password to meet current policy requirements.
 
  1. # Modify Minimum Password Score
  
racadm>>racadm set idrac.security.minimumpasswordscore 0
[Key=idrac.Embedded.1#Security.1]
Object value modified successfully
 
0 - No Protection
1 - Weak Protection
2 - Moderate Protection
3 - Strong Protection
 
  1. # Modify UserID2 Password
  
racadm>>racadm set idrac.users.2.password C@lv1n
[Key=idrac.Embedded.1#Users.2]
Object value modified successfully

対象製品

iDRAC9, iDRAC9 - 4.xx Series, iDRAC9 - 5.xx Series
文書のプロパティ
文書番号: 000198025
文書の種類: Solution
最終更新: 10 12月 2024
バージョン:  3
質問に対する他のDellユーザーからの回答を見つける
サポート サービス
お使いのデバイスがサポート サービスの対象かどうかを確認してください。