PowerStore: Partial data collection cannot be downloaded
概要: Partial data collection cannot be downloaded.
この記事は次に適用されます:
この記事は次には適用されません:
この記事は、特定の製品に関連付けられていません。
すべての製品パージョンがこの記事に記載されているわけではありません。
現象
Partial data collection can occur in a multi appliance setup when data collection fails in one of the appliances.
When this occurs, the status of the data collection is 'PARTIAL' and in PowerStore Manager UI, when choosing this DC for downloading, displays the message "Support material not available for download" as seen in the following screenshot:.
Example:
When this occurs, the status of the data collection is 'PARTIAL' and in PowerStore Manager UI, when choosing this DC for downloading, displays the message "Support material not available for download" as seen in the following screenshot:.
Example:
原因
The root cause is download for a data collection with 'dc_status' of 'PARTIAL' is not supported.
解決方法
To download the PARTIAL data collection bundle, use 'scp' from the command line in the service docker.
On the service docker of the appliance that has the PARTIAL data collection, do the following:
- Run 'svc_dc list' as shown below and identify the data collection to download.
[SVC:service@ABCDEF-B ~]$ svc_dc list |
- Elevate to root.
- Go to /cyc_var/cyc_service/data_collection/ and 'scp' the data collection to your target location as shown below:
root@ABCDEF-A:/home/service/user>cd /cyc_var/cyc_service/data_collection |
Resolution
This issue is fixed in PowerStore 3.0 and above where partial DCs can be downloaded for the PowerStore Manager UI.
対象製品
PowerStore文書のプロパティ
文書番号: 000213481
文書の種類: Solution
最終更新: 13 6月 2025
バージョン: 4
質問に対する他のDellユーザーからの回答を見つける
サポート サービス
お使いのデバイスがサポート サービスの対象かどうかを確認してください。