- Notes, cautions, and warnings
- Additional resources
- Platform Overview
- Technical specifications
- Hardware component descriptions
- Disk-array enclosures
- Cabling
- Rail kits and cables
The power supplies are located above the LCCs.
Each power supply is an auto-ranging, power-factor-corrected, multi-output, offline converter with its own line cord. Each supply supports a fully configured DAE and shares load currents with the other supply. The drives and LCCs have individual soft-start switches that protect the disk drives and LCCs if they are installed while the disk enclosure is powered up.
Location | Description |
---|---|
AC power in (recessed plug) connector | |
Release lever | |
Retaining bail | |
Power supply fault LED | |
AC output LED | |
AC input LED |
LED | Location | Color | State | Description |
---|---|---|---|---|
Power supply fault | Amber | On | Fault | |
- | Off | No fault or power off | ||
AC power LED (input) | Green | On | Power on | |
- | Off | Power off, verify source power | ||
AC output LED | Green | On | Power on | |
- | Off | Power off, verify source power |