- Notes, cautions, and warnings
- Additional resources
- Platform Overview
- Technical specifications
- Hardware component descriptions
- Disk-array enclosures
- Cabling
- Rail kits and cables
Where supported, the following example shows how to connect remaining four SAS back-end ports and shows the cable labels for these SAS cables, as well as the back-end bus and enclosure numbers for these DPE to DAE connections.
Cable the DAE to the 12-Gb/s SAS modules in the DPE 0, port 0 through port 3, to create back-end bus 2 through 5, BE2-BE5.
Use the following illustration to complete this cabling task:
For each new BE2-BE5:
Expansion port cable labeling details | Primary port cable labeling details | ||||
---|---|---|---|---|---|
Label part number | Label | Port | Label part number | Label | Port |
046-005-679 | SP A A0 PORT 0 | 046-021-16 | LCC A Port A | ||
046-005-718 | SP B B0 PORT 0 | 046-021-017 | LCC B Port A | ||
046-005-711 | SP A A0 PORT 1 | 046-021-018 | LCC A Port A | ||
046-005-719 | SP B B0 PORT 1 | 046-021-019 | LCC B Port A | ||
046-005-935 | SP A A0 PORT 2 | 046-021-020 | LCC A Port A | ||
046-005-937 | SP B B0 PORT 2 | 046-021-021 | LCC B Port A | ||
046-005-936 | SP A A0 PORT 3 | 046-021-022 | LCC A Port A | ||
046-005-938 | SP B B0 PORT 3 | 046-021-023 | LCC B Port A |
Connect the DAE to the DPE SP slot 0 port 0 to create back-end bus 2 (BE2) and designate this DAE as enclosure 0 of this bus. We refer to the address of this enclosure as BE2 EA0 (2_0).
Expansion port cable labeling details | Primary port cable labeling details | ||||
---|---|---|---|---|---|
Label part number | Label | Port | Label part number | Label | Port |
046-005-679 | SP A A0 PORT 0 | 046-021-016 | LCC A Port A | ||
046-005-718 | SP B B0 PORT 0 | 046-021-017 | LCC B Port A |