- Notes, cautions, and warnings
- Additional resources
- Platform Overview
- Technical specifications
- Hardware component descriptions
- Disk-array enclosures
- Cabling
- Rail kits and cables
Do NOT FORCE the cable into a connector. A click indicates that the cable is completely seated in the connector.
To prepare for this cabling task:
Typically these cables are 2-meters long. You use longer cables, typically 5-meters or 8-meters, to connect enclosures located in different racks. Cables are shipped without labels attached. The cables and ports are not colored.
Orient the cable connectors as described in the procedure that follows, making sure that you do NOT connect: