- Notes, cautions, and warnings
- Additional resources
- Platform Overview
- Technical specifications
- Hardware component descriptions
- Disk-array enclosures
- Cabling
- Rail kits and cables
Products have been tested to withstand the shock and random vibration levels. The levels apply to all three axes and should be measured with an accelerometer on the equipment enclosures within the cabinet and shall not exceed any of the following values.
Platform condition | Response measurement level |
---|---|
Non operational shock | 25 Gs, 3 ms duration |
Operational shock | 6 Gs, 11 ms duration |
Non operational random vibration | 0.40 Grms, 5–500 Hz, 30 minutes |
Operational random vibration | 0.21 Grms, 5–500 Hz, 10 minutes |
Systems that are mounted on an approved package have completed transportation testing to withstand the following shock and vibrations in the vertical direction only and shall not exceed:
Packaged system condition | Response measurement level |
---|---|
Transportation shock | 10 Gs, 12ms duration |
Transportation random vibration |
|