- Notes, cautions, and warnings
- Working on your computer
- Removing and
installing components
- Recommended tools
- Lithium-ion battery precautions
- Removing the battery
- Installing the battery
- Removing the base cover
- Installing the base cover
- Removing the keyboard
- Installing the keyboard
- Removing the hard drive assembly
- Installing the hard drive assembly
- Removing the hard drive bracket
- Installing the hard drive bracket
- Removing the WLAN card
- Installing the WLAN card
- Removing the memory module
- Installing the memory module
- Removing the palmrest
- Installing the palmrest
- Removing the coin cell battery
- Installing the coin cell battery
- Removing the USB board
- Installing the USB board
- Removing the VGA board
- Installing the VGA board
- Removing the speakers
- Installing the speakers
- Removing the system fan
- Installing the system fan
- Removing the display cable
- Installing the display cable
- Removing the power connector port
- Installing the power connector port
- Removing the system board
- Installing the system board
- Removing the heat sink
- Installing the heat sink
- Removing the display assembly
- Installing the display assembly
- Removing the display bezel
- Installing the display bezel
- Removing the camera
- Installing the camera
- Removing the display panel
- Installing the display panel
- System Setup
- Boot Sequence
- Navigation keys
- System Setup overview
- Accessing System Setup
- General screen options
- System Configuration screen options
- Video screen options
- Security screen options
- Secure Boot screen options
- Performance screen options
- Power Management screen options
- POST Behavior screen options
- Virtualization support screen options
- Wireless screen options
- Maintenance screen options
- System Log screen options
- Updating the BIOS
- System and setup password
- Diagnostics
- Technical specifications
- System specifications
- Processor specifications
- Memory specifications
- Audio specifications
- Video specifications
- Camera specifications
- Communication specifications
- Port and connector specifications
- Display specifications
- Keyboard specifications
- Touchpad specifications
- Battery specifications
- AC Adapter specifications
- Physical specifications
- Environmental specifications
- Contacting Dell
Dell Latitude 3560 Owner's Manual
System Configuration screen options
- Option
- Description
- Integrated NIC
- Allows you to configure the integrated network controller.
The options are:
- Disabled
- Enabled
- Enabled w/PXE: This option is enabled by default.
- SATA Operation
- Allows you to configure the internal SATA hard-drive
controller. The options are:
- Disabled
- AHCI
:This option is enabled by default.
- Drives
- Allows you to configure the SATA drives on board.
All drives are enabled by default. The options are:
- SATA-0
- SMART Reporting
- This field controls whether hard drive errors for
integrated drives are reported during system startup. This technology
is part of the SMART (Self Monitoring Analysis and Reporting Technology)
specification. This option is disabled by default.
- Enable SMART Reporting
- USB Configuration
- This field configures the integrated USB controller.
If Boot Support is enabled, the system is allowed to boot any type
of USB Mass Storage Devices (HDD, memory key, floppy).
If USB port is enabled, device attached to this port is enabled and available for OS.
If USB port is disabled, the OS cannot see any device attached to this port.
The options are:
- Enable USB Boot Support (by default enable)
- Enable External USB Port (by default enable)
- Audio
- This field enables or disables the integrated audio
controller. By default, the
Enable Audio option is selected.
The options are:
- Enable Microphone (by default enable)
- Enable Internal Speaker (by default enable)
- Keyboard Illumination
- This field lets you choose the operating mode of the
keyboard illumination feature. The keyboard brightness level can be
set from 0% to 100%. The options are:
- Disabled
- Dim
- Bright (enabled by default)
- Keyboard Backlight with AC
- The Keyboard Backlight with AC option does not affect the main keyboard illumination feature. Keyboard Illumination will continue to support the various illumination levels. This field has an effect when the backlight is enabled.
- Unobtrusive Mode
- This option, when enabled, pressing Fn+F7 turns off all light and sound emissions in the system. To resume normal operation, press Fn+F7 again. This option is disabled by default.
- Miscellaneous Devices
- Allows you to enable or disable the following devices:
- Enable Microphone
- Enable Camera
- Enable Hard Drive Free Fall Protection
- Enable Media Card
- Disable Media Card
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\