Installing the base cover
If you are replacing a component, remove the existing component before performing the installation procedure.
The following image indicates the location of the base cover and provides a visual representation of the installation procedure.
![Image: Installing the base cover](https://dl.dell.com/topics/latitude_3301_sm/images/GUID-C96153EE-D1FE-4DC6-B9D4-B20CA614258B-low.jpg)
![Image: Installing the base cover](https://dl.dell.com/topics/latitude_3301_sm/images/GUID-5FC0E284-37E6-478A-B619-E0A2E010A1CB-low.jpg)
- Place the computer with the hinges
facing towards you.
- Align the base cover on the palm-rest and keyboard assembly, and
snap the base cover into place.
- Replace the four screws (M2x6) that secure the base cover to the
palm-rest and keyboard assembly.
- Tighten the
three captive screws that secure the base cover to the palm-rest and
keyboard assembly.
Data is not available for the Topic