Removing the power-adapter port
The following image indicates the location of power-adapter port and provides a visual representation of the removal procedure.
- Remove the screw (M2.5x3.5) that secures the display-cable bracket to the system board.
- Remove the screw (M2x4) that secures the right display hinge to the system board.
- Open the display hinges at an angle of 90 degrees.
- Disconnect the power-adapter port cable from the system board.
- Remove the screw (M2x3) that secures the power-adapter port to the palm-rest and keyboard assembly.
- Lift the power-adapter port, along with its cable, off the palm-rest and keyboard assembly.
Data is not available for the Topic