Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Precision 7960 Tower Service Manual

PDF

Removing the front system-fan assembly

Prerequisites

  1. Follow the procedure in Before working inside your computer.
  2. Remove the left-side cover.
  3. Remove the air shroud.
  4. Remove the PCIe holder.

About this task

The following images indicate the location of the front system-fan assembly and provide a visual representation of the removal procedure.

Removing the front system-fan assembly

Steps

  1. Disconnect the fan cables from the connectors on the system board.
  2. Loosen the captive screws that secure the front system-fan assembly to the system-board tray.
  3. Disconnect the speaker cable from the speaker dongle-cable and move the speaker cable away from the fan assembly.
  4. Remove the three (6-32) screws that secure the front system-fan assembly to the chassis.
  5. Move the fan assembly at an angle from the chassis.
  6. Lift and remove the fan assembly from the computer.
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\