Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Baskets

Dell PowerEdge FN I/O Module Configuration Guide 9.10(0.0)

PDF

Enabling RIP Globally

By default, RIP is not enabled in the system.

To enable RIP globally, use the following commands.
  1. Enter ROUTER RIP mode and enable the RIP process on the system. CONFIGURATION mode router rip
  2. Assign an IP network address as a RIP network to exchange routing information. ROUTER RIP mode network ip-address

Example of Verifying RIP is Enabled

After designating networks with which the system is to exchange RIP information, ensure that all devices on that network are configured to exchange RIP information.

The Dell Networking OS default is to send RIPv1 and to receive RIPv1 and RIPv2. To change the RIP version globally, use the version command in ROUTER RIP mode.

To view the global RIP configuration, use the show running-config command in EXEC mode or the show config command in ROUTER RIP mode. 

Dell(conf-router_rip)#show config
                                 !
                                 router rip
                                 network 10.0.0.0
                                 Dell(conf-router_rip)#

When the RIP process has learned the RIP routes, use the show ip rip database command in EXEC mode to view those routes. 

Dell#show ip rip database
                                 Total number of routes in RIP database: 978
                                 160.160.0.0/16
                                 [120/1] via 29.10.10.12, 00:00:26, Fa 0/0
                                 160.160.0.0/16    auto-summary
                                 2.0.0.0/8
                                 [120/1] via 29.10.10.12, 00:01:22, Fa 0/0
                                 2.0.0.0/8         auto-summary
                                 4.0.0.0/8
                                 [120/1] via 29.10.10.12, 00:01:22, Fa 0/0
                                 4.0.0.0/8         auto-summary
                                 8.0.0.0/8
                                 [120/1] via 29.10.10.12, 00:00:26, Fa 0/0
                                 8.0.0.0/8         auto-summary
                                 12.0.0.0/8
                                 [120/1] via 29.10.10.12, 00:00:26, Fa 0/0
                                 12.0.0.0/8        auto-summary
                                 20.0.0.0/8
                                 [120/1] via 29.10.10.12, 00:00:26, Fa 0/0
                                 20.0.0.0/8        auto-summary
                                 29.10.10.0/24 directly connected,Fa 0/0
                                 29.0.0.0/8        auto-summary
                                 31.0.0.0/8
                                 [120/1] via 29.10.10.12, 00:00:26, Fa 0/0
                                 31.0.0.0/8        auto-summary
                                 192.162.2.0/24
                                 [120/1] via 29.10.10.12, 00:01:21, Fa 0/0
                                 192.162.2.0/24    auto-summary
                                 192.161.1.0/24
                                 [120/1] via 29.10.10.12, 00:00:27, Fa 0/0
                                 192.161.1.0/24    auto-summary
                                 192.162.3.0/24
                                 [120/1] via 29.10.10.12, 00:01:22, Fa 0/0
                                 192.162.3.0/24    auto-summary
To disable RIP globally, use the no router rip command in CONFIGURATION mode.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\