Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Baskets

Dell PowerEdge FN I/O Module Configuration Guide 9.10(0.0)

PDF

Configuring Match Routes

To configure match criterion for a route map, use the following commands.

  • Match routes whose next hop is a specific interface. CONFIG-ROUTE-MAP mode match interface interface

    The parameters are:

    • For a Loopback interface, enter the keyword loopback then a number between zero (0) and 16383.
    • For a 10-Gigabit Ethernet interface, enter the keyword tengigabitEthernet then the slot/port information.
    • For a VLAN, enter the keyword vlan then a number from 1 to 4094.
  • Match destination routes specified in a prefix list (IPv4). CONFIG-ROUTE-MAP mode match ip address prefix-list-name
  • Match next-hop routes specified in a prefix list (IPv4). CONFIG-ROUTE-MAP mode match ip next-hop { access-list-name | prefix-list prefix-list-name}
  • Match source routes specified in a prefix list (IPv4). CONFIG-ROUTE-MAP mode match ip route-source { access-list-name | prefix-list prefix-list-name}
  • Match routes with a specific value. CONFIG-ROUTE-MAP mode match metric metric-value
  • Match routes specified as internal or external to OSPF, ISIS level-1, ISIS level-2, or locally generated. CONFIG-ROUTE-MAP mode match route-type {external [type-1 | type-2] | internal | level-1 | level-2 | local }
  • Match routes with a specific tag. CONFIG-ROUTE-MAP mode match tag tag-value

To create route map instances, use these commands. There is no limit to the number of match commands per route map, but the convention is to keep the number of match filters in a route map low. Set commands do not require a corresponding match command.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\