Dell PowerEdge FN I/O Module Configuration Guide 9.10(0.0)

You can copy and paste from these examples to your CLI. To support your own IP addresses, interfaces, names, and so on, be sure that you make the necessary changes.

Basic OSPFv2 Router Topology

The following illustration is a sample basic OSPFv2 topology.

Figure 1. Basic Topology and CLI Commands for OSPFv2

OSPF Area 0 — Gl 1/1 and 1/2

router ospf 11111
                                 network 10.0.11.0/24 area 0
                                 network 10.0.12.0/24 area 0
                                 network 192.168.100.0/24 area 0
                                 !
                                 interface GigabitEthernet 1/1
                                 ip address 10.1.11.1/24
                                 no shutdown
                                 !
                                 interface GigabitEthernet 1/2
                                 ip address 10.2.12.2/24
                                 no shutdown
                                 !
                                 interface Loopback 10
                                 ip address 192.168.100.100/24
                                 no shutdown
                              

OSPF Area 0 — Gl 3/1 and 3/2

router ospf 33333
                                 network 192.168.100.0/24 area 0
                                 network 10.0.13.0/24 area 0
                                 network 10.0.23.0/24 area 0
                                 !
                                 interface Loopback 30
                                 ip address 192.168.100.100/24
                                 no shutdown
                                 !
                                 interface GigabitEthernet 3/1
                                 ip address 10.1.13.3/24
                                 no shutdown
                                 !
                                 interface GigabitEthernet 3/2
                                 ip address 10.2.13.3/24
                                 no shutdown
                              

OSPF Area 0 — Gl 2/1 and 2/2

router ospf 22222
                                 network 192.168.100.0/24 area 0
                                 network 10.2.21.0/24 area 0
                                 network 10.2.22.0/24 area 0
                                 !
                                 interface Loopback 20
                                 ip address 192.168.100.20/24
                                 no shutdown
                                 !
                                 interface GigabitEthernet 2/1
                                 ip address 10.2.21.2/24
                                 no shutdown
                                 !
                                 interface GigabitEthernet 2/2
                                 ip address 10.2.22.2/24
                                 no shutdown