Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell G3 15 3500 Service Manual

PDF

Removing the power button with fingerprint reader

Prerequisites

  1. Follow the procedure in Before working inside your computer.
  2. Remove the base cover.
  3. Remove the memory module.
  4. Remove the WLAN card.
  5. Remove the solid-state drive in M.2 slot one.
  6. Remove the solid-state drive in M.2 slot two.
  7. Remove the battery.
  8. Remove the coin-cell battery.
  9. Remove the left fan.
  10. Remove the right fan.
  11. Remove the heat sink.
  12. Remove the power-adapter port.
  13. Remove the system board.
    NOTE The system board can be removed along with the heat sink.

Steps

  1. Locate the power button with fingerprint reader on your computer.
    Removing the power button with fingerprint reader
  2. Remove the two screws (M2x3) that secure the power button with fingerprint reader to the palm-rest and keyboard assembly.
  3. Lift the power button with fingerprint-reader, along with the fingerprint-reader cable, off the palm-rest and keyboard assembly.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\