Dell EMC OpenManage Enterprise Power Manager Version 2.0 User’s Guide

Add unmonitored device details

Unmonitored devices are user-defined or non-compatible devices that must be considered for accurate rack management. The unmonitored devices are not monitored for any Power Manager capabilities such as power, thermal monitoring, power policy and EPR, and alert thresholds.

1. Launch OpenManage Enterprise, and then click Plugins > Power Management > Power Manager Devices > UNMONITORED > Unmonitored Devices.
   The Unmonitored Devices tab is displayed.
2. To add the Unmonitored Devices, click Add.
   The Add Unmonitored Devices page is displayed.
3. Provide the device details and click Finish.
   For information about each field, see the following table.

   Table 1. Details for Unmonitored DevicesDetails for Unmonitored Devices

   Field	Description	Mandatory	Value Ranges
   Device Name	Provide a unique device name.	Yes	Combination of characters, special characters, and numbers. Limit: 1-255 characters
   Description	Provide brief information about the device you are adding.	No	Combination of characters, special characters, and numbers. Limit: 0-255 characters
   Hostname	Provide a hostname.	No	Combination of characters, special characters, and numbers. Limit: 1-255 characters
   Identifier	Provide a unique identifier for the device.	Yes	Combination of characters, special characters, and numbers. Limit: 1-255 characters
   Model	Provide the model name.	No	Combination of characters, special characters, and numbers. Limit: 0-255 characters
   Size of Device (U)	Provide the space occupied on the rack.	Yes	Numbers only Limit: 1-80
   Estimated Max Power (W)	Provide the defined maximum power that the device can consume.	No	Numbers only Limit: 1–629365631