Dell EMC OpenManage Enterprise Power Manager Version 2.0 User’s Guide

View devices and groups added to Power Manager

1. Launch OpenManage Enterprise, and then click Plugins > Power Management > Power Manager Devices.
   The Power Manager Devices tab is displayed.
2. To refresh the list of devices and groups that are added, click Refresh the list for Power Manager Capabilities.
3. To view a device or a group that is added to Power Manager, perform one of the following:
   • To view a static group, click the Static Groups tab.
   • To view a physical group, click the Physical Groups tab.
     NOTE The location of the physical group is displayed based on the hierarchy that is selected for this particular group at the time of creation.
   • To view a device, click the Individual Devices tab.
   • To view all the devices added to Power Manager as individual devices and as a part of groups, click the All Monitored Devices tab.
4. Optional: To filter and view the data on any of the tabs:
   1. Click a tab.
   2. Click Advanced Filters.
   3. Select a filter category.
   The following filters are displayed for the Static Groups and Physical Groups tabs:

   • Group Name

   The following filters are displayed for the Individual Devices tab:

   • Health State
   • Power State
   • Connection State
   • Name
   • Identifier
   • Model
   • Type
   • Managed State

   The following filters are displayed for the All Monitored Devices tab:

   • Health State
   • Power State
   • Connection State
   • Name
   • Identifier
   • Model
   • Type
   • Managed State
   • Part of Group

   For information about each filter, see the Appendix.

5. Optional: To clear the filters, click Clear All Filters.
6. Optional: To sort any column alphabetically, click the column name so that an arrow is displayed with the column name.