Dell EMC OpenManage Enterprise Power Manager Version 2.0 User’s Guide

Delete alert thresholds

To remove the thresholds that are configured on devices or groups, clear all the thresholds.

1. From OpenManage Enterprise, perform one of the following steps:
   • For a device:
     1. Click the Devices tab.

        All the devices that are discovered in OpenManage Enterprise are displayed.

     2. From the list of devices, click a device name.

        The details of the device are displayed on the Overview page.

     3. To view Power Manager-related information, click the Power Management and Monitoring tab.
   • For a static group:
     1. Click Devices > Static Groups > Group name.

        All the devices that are part of the static group are displayed.

     2. To view Power Manager-related information, click Group Details.
   • For a physical group, perform one of the following steps:
     1. Click Devices > Physical Hierarchy > Group name.

        All the devices that are part of the physical group are displayed.

     2. To view Power Manager-related information, click Group Details.

     OR

     1. Launch OpenManage Enterprise, and then click Plugins > Power Management > Rack View.

        The Rack View tab is displayed.

        Optional: To filter and view the data, expand the Advanced Filters option. Following is a list of categories available:

        • Group Name
        • Health State
        • Power State
        • Connection State
        • Type

        Select the categories of your choice and view the filtered data.

     2. Click the device name or IP address.
2. On the Alert Thresholds tab, click Edit.
   The Edit Alert Thresholds page is displayed.
3. To remove all the thresholds, clear all the existing threshold values, and click Apply.