Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

bgp confederation identifier

Configure an identifier for a BGP confederation.

Syntax

bgp confederation identifier as-number

To delete a BGP confederation identifier, use the no bgp confederation identifier as-number command.

Parameters

as-number

Enter the AS number. The range is from 1 to 65535.

Defaults

Not configured.

Command Modes

ROUTER BGP

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

The autonomous systems configured in this command are visible to the EBGP neighbors. Each autonomous system is fully meshed and contains a few connections to other autonomous systems. The next hop, MED, and local preference information is preserved throughout the confederation.

The system accepts confederation EBGP peers without a LOCAL_PREF attribute. The software sends AS_CONFED_SET and accepts AS_CONFED_SET and AS_CONF_SEQ.