Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

radius-server key

Configure a key for all RADIUS communications between the switch and the RADIUS host server.

Syntax

radius-server key [ encryption-type] key

To delete a password, use the no radius-server key command.

Parameters

encryption-type	(OPTIONAL) Enter either zero ( `0`) or `7` as the encryption type for the key entered. The options are: `0` is the default and means the key is not encrypted and stored as clear text. `7` means that the key is encrypted and hidden.
key	Enter a string that is the key to be exchanged between the switch and RADIUS servers. It can be up to 42 characters long.

Defaults

Not configured.

Command Modes

CONFIGURATION

Supported Modes

All Modes

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.4(0.0)	Supported on the FN I/O Aggregator.
9.3(0.0)	Supported on the M I/O Aggregator.

Usage Information

The key configured on the switch must match the key configured on the RADIUS server daemon.

If you configure the key parameter in the radius-server host command, the key configured with the radius-server key command is the default key for all RADIUS communications.

Related Commands

radius-server host — configures a RADIUS host.