Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

ipv6 name-server

Enter up to six IPv6 addresses of name servers. The order you enter the addresses determines the order of their use.

Syntax

ipv6 name-server ipv6-address [ ipv6-address2... ipv6-address6]

To remove a name server, use the no ipv6 name—server ipv6–address command.

Parameters

ipv6-address	Enter the IPv6 address (X:X:X:X::X) of the name server to be used. NOTE: The :: notation specifics successive hexadecimal fields of zeros.
ipv6-address2... ipv6-address6	(OPTIONAL) Enter up to five more IPv6 addresses, in the x:x:x:x::x format, of name servers to be used. Separate the IPv6 addresses with a space.

Defaults

none

Command Modes

CONFIGURATION

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

You can separately configure both IPv4 and IPv6 domain name servers.