Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Inspiron 15 7000 Gaming Service Manual

PDF

Procedure

  1. Using pull tab, disconnect the camera cable from the system board.
  2. Peel the camera cable off the computer base.
  3. Remove the antenna cables from the routing guides on the computer base.
  4. Remove the screw (M2x3) that secures the display-cable bracket to the computer base.
  5. Lift the display-cable bracket off the computer base.
  6. Using the pull tab, disconnect the display cable from the system board.
  7. Remove the display cable from the routing guides on the computer base and peel the display cable off the computer base. Image: Disconnecting cables
  8. Open the latch and disconnect the power-button board cable from the system board.
  9. Open the latch and disconnect the keyboard-backlight cable from the system board.
  10. Open the latch and disconnect the touchpad cable from the system board.
  11. Peel off the tape that secures the keyboard cable to the system board.
  12. Open the latch and disconnect the keyboard cable from the system board. Image: Disconnecting cables
  13. Remove the 19 screws (M2.5x6) that secure the computer base to the palm-rest assembly.
  14. Remove the four screws (M2x3) that secure the computer base to the palm-rest assembly. Image: Removing the screws
  15. Turn the computer over and open the display.
  16. Using a plastic scribe, release the tabs on palm-rest assembly from the slots on the computer base.
  17. Lift the palm-rest assembly, along with the display assembly, off the computer base. Image: Removing the palm-rest assembly
  18. After performing all the above steps, you are left with the computer-base assembly.Image: Computer-base assembly
  19. Remove the coin-cell battery.
  20. Remove the status-light board.
  21. Remove the speakers.
  22. Remove the system board.
  23. Remove the power-adapter port. Image: Computer base

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\