Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Inspiron 15 7000 Gaming Service Manual

Procedure

  • NOTE: The latch on the hard-drive locking connector is fragile. Pulling the latch forcefully may damage the hard-drive locking connector. Exercise care when handling the latch on the hard-drive locking connector.
  1. Open the latch and disconnect the hard-drive cable from the system board.
  2. Peel off the hard-drive cable from the computer base.
  3. Remove the four screws (M2.5x3+3) that secure the hard-drive assembly to the computer base.
  4. Lift the hard-drive assembly, along with its cable, off the computer base. Image: Removing the hard-drive assembly
  5. Disconnect the interposer from the hard-drive assembly. Image: Disconnecting the interposer
  6. Remove the four screws (M3x3) that secure the hard-drive bracket to the hard drive.
  7. Lift the hard-drive bracket off the hard drive.Image: Removing the hard-drive bracket

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\