Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell PowerProtect Cyber Recovery 19.13 Installation Guide

PDF

Production storage systems

The following table lists the supported storage systems:

Table 1. Cyber Recovery-supported storage systems
Storage system Notes
PowerProtect DD systems running PowerProtect DD OS Version 6.2.1.50 and later
NOTE: The Cyber Recovery software does not support:
  • DD with Cloud DR and Cloud Tier in the Cyber Recovery vault
  • DD with Cloud Tier in the Cyber Recovery vault

Ensure that the Cyber Recovery DD system has more space than the production DD system. For information about sizing your Cyber Recovery environment, see Dell PowerProtect Cyber Recovery Solution Guide.

Dell DP4400 Integrated Data Protection Appliances

The replication target can be a DP4400 Integrated Data Protection Appliance. If the replication target in the Cyber Recovery vault is a DP4400 Integrated Data Protection Appliance, the production-side system must also be a DP4400 Integrated Data Protection Appliance. Other than DD OS and Avamar Virtual Edition (AVE), the Cyber Recovery software does not support other features on the Integrated Data Protection Appliance in the Cyber Recovery vault.

NOTE:
  • If the production DP4400 appliance replicates to an AVE and PowerProtect DD system in the Cyber Recovery vault, the Avamar geometry of the production and target Avamar servers must match.
  • For a DP4400 appliance running Version 2.7.0 and later, the Cyber Recovery solution can be integrated into the appliance. If the appliance is running a version earlier than Version 2.7.0, the Cyber Recovery solution is external to the appliance.
Dell DP5300 and 5800 Integrated Data Protection Appliances The replication target can be a DP5300 or 5800 Integrated Data Protection Appliance.
NOTE: For Integrated Data Protection Appliances running Version 2.7.0 and later, the Cyber Recovery solution can be integrated into the appliance. For appliances running a version earlier than Version 2.7.0, the Cyber Recovery solution is external to the appliance.
Dell DP8300 and 8800 Integrated Data Protection Appliances

The DP8300 and DP8800 Integrated Data Protection Appliances are not supported in the production or the Cyber Recovery vault environment due to Avamar Grid support limitations. However, replication through a single node or Virtual Edition is supported. For configuration details, contact your Dell Technologies service representative.

NOTE: The Cyber Recovery solution supports the Dell Disk Library for mainframe (DLm) solution. For more information, contact your Dell Technologies service representative.

When multiple DD systems are deployed in the production environment, they can be configured to replicate to as many as five DD systems in the Cyber Recovery vault.


Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\