Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products

Dell EMC Metro node 7.1 CLI Guide

PDF

ndu status

Displays the NDU status.

Contexts

All contexts.

Syntax

ndu status

[--verbose]

Description

If an NDU firmware or OS upgrade is running, this command displays the upgrade activity.

If neither NDU firmware or OS upgrade is running, this command displays information about the previous NDU firmware upgrade.

If the last operation was a rolling-upgrade, the OS upgrade information is displayed. The ndu start command clears this information.

If an NDU firmware or OS upgrade has failed, this command displays a message to use the ndu recover command.

if an NDU recovery is in progress, has succeeded or failed, this command displays a status message.

Examples

Display a successful NDU after completion:

VPlexcli:/> ndu status
Gathering NDU status...
No firmware or OS upgrade in progress.
Last Firmware Upgrade attempt on Fri, 17 Dec 2010 01:07:51
    From version 2.1.17.0.0 to version 2.1.19.0.0
    Was started on management server 10.6.209.61
    Result: succeeded
================================================================================
[Fri Dec 17 18:05:21 2010] System state summary
================================================================================
  The directors {director-1-1-B, director-1-1-A, director-1-2-B, director-1-2-A} are operational at version 2.1.19.0.0.
================================================================================
The output for 'ndu status' has been captured in /var/log/VPlex/cli/capture/ndu-status-session.txt

Display NDU status after an NDU failed and ndu recover was run:

VPlexcli:/> ndu status
Gathering NDU status...
No firmware or OS upgrade in progress.
Last Firmware Upgrade attempt on Fri, 17 Dec 2010 00:39:29
    From version 2.1.19.0.0 to version None
    Was started on management server 10.6.209.61
    Result: failed
    Reason: Encountered a problem while preparing to start the NDU.
Unable to extract director package files, return code 2.
NDU recover succeeded on management server 127.0.0.1 on Fri, 17 Dec 2010 01:00:27.
================================================================================
[Fri Dec 17 01:05:25 2010] System state summary
================================================================================
  The directors {director-1-1-B, director-1-1-A, director-1-2-B, director-1-2-A} are operational at version 2.1.19.0.0.
================================================================================
The output for 'ndu status' has been captured in /var/log/VPlex/cli/capture/ndu-status-session.txt

See also

  • ndu pre-check
  • ndu start
  • ndu recover
  • upgrade-package

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\