Dell EMC Metro node 7.1 CLI Guide

Contexts

All contexts.

Syntax

scheduleSYR add 


[-d|--dayOfWeek] [0-6]

[-t|--hours] [0-23]

[-m|--minutes] [0-59]

Arguments

Description

Typically, SYR collection and reporting are configured at initial system setup. Use this command to add a scheduled SYR collection time if none was configured.

SYR data collection can be scheduled to occur at most once a week. Attempts to add another weekly schedule results in an error.

SYR reporting gathers metro node configuration files and forward them to Dell EMC. SYR reports provide:

• Faster problem resolution and RCA
• Proactive maintenance
• Data for performance analysis

To modify the existing SYR collection time, use the scheduleSYR remove command to delete the current time, and the scheduleSYR add command to specify a new collection time.

Example

Schedule an SYR collection for every Wednesday at 12:30 p.m.:

VPlexcli:/> scheduleSYR add -d 3 -t 12 -m 30
SYR data collection job scheduled
VPlexcli:/> scheduleSYR list
SYR data collection job is currently scheduled at:
Day of Week: 3  (Sunday=0, Monday=1,...Saturday=6)
Hours: 12
Minutes: 30

See also

• configuration event-notices-reports config
• configuration event-notices-reports reset
• schedule list
• scheduleSYR list
• scheduleSYR remove
• syrcollect