Dell Configuration Guide for the S4048–ON System 9.14.2.6

Creating a Virtual Router

To enable VRRP, create a virtual router. In Dell EMC Networking Operating System (OS), the virtual router identifier (VRID) identifies a VRRP group.

• Create a virtual router for that interface with a VRID.
  INTERFACE mode
  vrrp-group vrid
  The VRID range is from 1 to 255.
  NOTE The interface must already have a primary IP address defined and be enabled, as shown in the second example.
• Delete a VRRP group.
  INTERFACE mode
  no vrrp-group vrid

DellEMC(conf)#interface tengigabitethernet 1/1
DellEMC(conf-if-te-1/1)#vrrp-group 111
DellEMC(conf-if-te-1/1-vrid-111)#

DellEMC(conf-if-te-1/1)#show conf
!
interface TenGigabitEthernet 1/1
  ip address 10.10.10.1/24
!
  vrrp-group 111
  no shutdown