Example Configuration and Verification
The following example contains static routes for both default and nondefault VRFs.
Dell#sh run | grep bfd bfd enable ip route bfd prefix-list p4_le ip route bfd vrf vrf1 ip route bfd vrf vrf2 ip route bfd vrf vrf1 prefix-list p4_le
The following example shows that sessions are created for static routes for the default VRF.
Dell#show bfd neighbors * - Active session role Ad Dn - Admin Down B - BGP C - CLI I - ISIS O - OSPF O3 - OSPFv3 R - Static Route (RTM) M - MPLS V - VRRP VT - Vxlan Tunnel LocalAddr RemoteAddr Interface State Rx-int Tx-int Mult Clients * 11.1.1.1 11.1.1.2 Te 1/1 Up 200 200 3 R * 21.1.1.1 21.1.1.2 Vl 100 Up 200 200 3 R * 31.1.1.1 31.1.1.2 Vl 101 Up 200 200 3 R
The following example shows that sessions are created for static routes for the nondefault VRFs.
Dell# show bfd vrf vrf2 neighbors * - Active session role Ad Dn - Admin Down B - BGP C - CLI I - ISIS O - OSPF O3 - OSPFv3 R - Static Route (RTM) M - MPLS V - VRRP VT - Vxlan Tunnel LocalAddr RemoteAddr Interface State Rx-int Tx-int Mult VRF Clients * 13.1.1.1 13.1.1.2 Te 1/2 Up 200 200 3 2 R * 23.1.1.1 23.1.1.2 Vl 300 Up 200 200 3 2 R * 33.1.1.1 33.1.1.2 Vl 301 Up 200 200 3 2 R