Dell Configuration Guide for the S4048–ON System 9.14.2.6

Enabling and Configuring Startup Configuration Hash Verification

To enable and configure startup configuration hash verification, follow these steps:

1. Enable the startup configuration hash verification feature.
   CONFIGURATION mode
   verified startup-config
2. Generate the hash checksum for your startup configuration file.
   EXEC Privilege
   generate hash {md5 | sha1 | sha256} {flash://filename | startup-config}
3. Verify the hash checksum of the current startup configuration on the local file system.
   EXEC Privilege
   verified boot hash startup—config hash-value
   NOTE The verified boot hash command is only applicable for the startup configuration file in the local file system.

DellEMC# verified boot hash startup—config 619A8C1B7A2BC9692A221E2151B9DA9E