Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Inspiron 27-7790 Service Manual

Installing the fan

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The following image indicates the location of the fan and provides a visual representation of the installation procedure.

Image: Installing the fan

Steps

  1. Align the screw holes on the fan with the screw holes on the display-assembly base.
  2. Replace the three screws (M2x2.5) that secure the fan to the display-assembly base.
  3. Route the fan cable through the routing guides on the display-assembly base.
  4. Connect the fan cable to the system board.

Next steps

  1. Install the system-board shield.
  2. Install the stand.
  3. Install the bottom cover.
  4. Install the back cover.
  5. Follow the procedure in After working inside your computer.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\