Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Inspiron 27-7790 Service Manual

Removing the base panel

Prerequisites

  1. Follow the procedure in Before working inside your computer.
  2. Remove the back cover.
  3. Remove the bottom cover.
  4. Remove the stand.
  5. Remove the hard drive.
  6. Remove the system-board shield.
  7. Remove the memory modules.
  8. Remove the fan.
  9. Remove the heat sink.
  10. Remove the coin-cell battery.
  11. Remove the antennas.
  12. Remove the wireless card.
  13. Remove the speakers.
  14. Remove the solid-state drive.
  15. Remove the power-button board.
  16. Remove the camera.
  17. Remove the microphones.
  18. Remove the system board.
  19. Remove the display panel.

About this task

The following image indicates the location of the base panel and provides a visual representation of the removal procedure.

Image: Removing the base panel

Image: Removing the base panel

Steps

  1. Remove the 21 screws (M3x5) that secure the base panel to the display-assembly base.
  2. Remove the base panel and lift the base panel off the display-assembly base.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\