Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Inspiron 27-7790 Service Manual

Removing the microphones

Prerequisites

  1. Follow the procedure in Before working inside your computer.
  2. Remove the back cover.
  3. Remove the bottom cover.
  4. Remove the stand.
  5. Remove the system-board shield.
  6. Remove the speakers.

About this task

The following image indicates the location of the microphones and provides a visual representation of the removal procedure.

Image: Removing the microphones

Steps

  1. Disconnect the microphone cable from the system board and release it from the routing guides on the display-assembly base.
  2. Remove the eight screws (M2X2.5) that secure the microphone modules (2) to the base panel and release them from the routing guides on the display-assembly base.
  3. Lift the microphone modules (2) off the slots on the base panel.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\