PowerScale OneFS 9.3.0.0 CLI Command Reference

Syntax

isi ipmi settings modify
  [--enabled {yes | no}]
  [--allocation-type {static | dhcp}]
  [--force | -f]
  [--help | -h ]
  [--verbose | -v]

Options

--enabled {yes | no}

Enable or disable remote IPMI management. When you enable remote IPMI management, OneFS tries to enable the BMC user account used for remote IPMI command authentication on IPMI-supported nodes. When you disable remote IPMI management , OneFS disables the BMC user account on IPMI-supported nodes, used for remote IPMI command authentication.

--allocation-type {static | dhcp}

Specify the network allocation type: either static network configuration or DHCP. If you set --allocation-type to DHCP, the BMC LAN interfaces in the cluster attempt to acquire a DHCP address if one is available. If you set --allocation-type to static, each BMC LAN interface acquires addresses that were previously configured using isi ipmi network.

{--force | -f}

Do not ask for confirmation before running this command.

{--help | -h}

Displays help for this command.

{--verbose | -v}

Displays more detailed information.