PowerScale OneFS 9.3.0.0 CLI Command Reference

Syntax

isi snmp settings modify
  [--service {yes | no}]
  [--system-location <string>]
  [--revert-system-location]
  [--system-contact <string>]
  [--revert-system-contact]
  [--snmp-v1-v2c-access {yes | no}]
  [--revert-snmp-v1-v2c-access]
  [--read-only-community <string>]
  [--revert-read-only-community]
  [--snmp-v3-access {yes | no}]
  [--revert-snmp-v3-access]
  [--snmp-v3-read-only-user <string>]
  [--revert-snmp-v3-read-only-user]
  [--snmp-v3-auth-protocol {SHA | MD5}]
  [--snmp-v3-priv-protocol {AES | DES}]
  [--snmp-v3-security-level {noAuthNoPriv | authNoPriv | authPriv}]
  [--snmp-v3-password <string>]
  [--revert-snmp-v3-password]
  [--set-snmp-v3-password]
  [--snmp-v3-priv-password <string>]
  [--revert-snmp-v3-priv-password]
  [--set-snmp-v3-priv-password]
  [--verbose]

Options

--service {yes | no}

Enables or disables the SNMP service.

--system-location <string>

The location of the SNMP system.

--revert-system-location

Sets --system-location to the system default.

--system-contact <string>

A valid email address for the system owner.

--revert-system-contact

Sets --system-contact to the system default.

--snmp-v1-v2c-access {yes | no}

Enables or disables the SNMP v1 and v2c protocols.

--revert-snmp-v1-v2c-access

Sets --snmp-v1-v2c-access to the system default.

{--read-only-community | -c} <string>

The name of the read-only community.

--revert-read-only-community

Sets --read-only-community to the system default.

--snmp-v3-access {yes | no}

Enables or disables SNMP v3.

--revert-snmp-v3-access

Sets --snmp-v3-access to the system default.

{--snmp-v3-read-only-user | -u} <string>

The read-only user for SNMP v3 read requests.

--revert-snmp-v3-read-only-user

Sets --snmp-v3-read-only-user to the system default.

--snmp-v3-auth-protocol {SHA | MD5}

Set the SNMP v3 authentication algorithm to either SHA or MD5. The default is MD5.

--snmp-v3-priv-protocol {AES | DES}

Set the SNMP v3 encryption algorithm to either AES or DES. The default is AES.

--snmp-v3-security-level {noAuthNoPriv | authNoPriv | authPriv}

Sets the SNMP v3 security level. The default is authNoPriv.

--set-snmp-v3-password

Specify --snmp-v3-password interactively.

{--snmp-v3-password | -p} <string>

Modify the SNMP v3 password.

--revert-snmp-v3-password

Sets --snmp-v3-password to the system default.

--snmp-v3-priv-password <string>

Set the SNMP v3 privacy password.

--revert-snmp-v3-priv-password

Set the SNMP v3 privacy password to the the system default.

--set-snmp-v3-priv-password

Specify the --snmp-v3-priv-password interactively.