PowerScale OneFS 9.3.0.0 CLI Command Reference

Syntax

isi smb settings zone modify
  [--access-based-share-enum {yes | no}]
  [--revert-access-based-share-enum]
  [--enable-security-signatures {yes | no}]
  [--revert-enable-security-signatures]
  [--reject-unencrypted-access {yes | no}]
  [--revert-reject-unencrypted-access]
  [--require-security-signatures {yes | no}]
  [--revert-require-security-signatures]
  [--server-side-copy {yes | no}]
  [--revert-server-side-copy]
  [--support-multichannel {yes | no}]
  [--revert-support-multichannel]
  [--support-smb2 {yes | no}]
  [--revert-support-smb2]
  [--support-smb3-encryption {yes | no}]
  [--revert-support-smb3-encryption]
  [--zone <string>]
  [--verbose]

Options

--access-based-share-enum {yes | no}

Enumerates only the files and folders that the requesting user has access to.

--revert-access-based-share-enum

Sets the value to the system default for --access-based-share-enum.

--enable-security-signatures {yes | no}

Indicates whether the server supports signed SMB packets.

--revert-enable-security-signatures

Sets the value to the system default for --enable-security-signatures.

--reject-unencrypted-access {yes | no}

Rejects unencrypted client sessions.

--revert-reject-unencrypted-access

Sets the value to the system default for --reject-unencrypted-access.

--require-security-signatures {yes | no}

Specifies whether packet signing is required. If set to yes, signing is always required. If set to no, signing is not required but clients requesting signing will be allowed to connect if the --enable-security-signatures option is set to yes.

--revert-require-security-signatures

Sets the value to the system default for --require-security-signatures.

--server-side-copy {yes | no}

Enables or disables SMB server-side copy functionality. The default is yes.

--revert-server-side-copy

Sets the value to the system default for --server-side-copy.

--support-multichannel {yes | no}

Specifies whether Multichannel for SMB 3.0 is enabled on the cluster. SMB Multichannel is enabled by default.

--revert-support-multichannel

Set the value of --support-multichannel back to the default system value.

--support-smb2 {yes | no}

Specifies whether to support the SMB 2.0 protocol. The default setting is yes.

--revert-support-smb2

Sets the value to the system default for --support-smb2.

--support-smb3-encryption {yes | no}

Supports SMBv3 encryption for the access zone. The default setting is no.

--revert-support-smb3-encryption

Sets the value to the system default for --support-smb3-encryption.

--zone <string>

Access zone.