Latitude 5290 Owner's Manual

Removing display assembly

1. Follow the procedure in Before working inside your computer.
2. Remove the:
   1. base cover
   2. battery
   3. memory module
   4. WLAN card
   5. WWAN card (optional)
3. To disconnect the display cable:
   1. Release the WLAN and WWAN cables from the routing channels [1].
   2. Remove the single (M2x3) screw that secures the display cable bracket in place [2].
   3. Remove the display cable bracket that secures the display cable from the system [3].
   4. Disconnect the display cable from the connector on the system board [4].
      
4. Place the computer on the edge of a plane surface with the display facing down.
5. To remove the display assembly:
   1. Remove the 4 (M2*5) screws that secure the display assembly to the system [1].
   2. Lift the display assembly away from the system [2].