Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell Latitude 5500 Service Manual

PDF

Installing the display assembly

About this task

NOTE: Ensure that the hinges are opened to the maximum before replacing the display assembly on the palmrest.

Steps

  1. Align and place the system chassis under the hinges of the display assembly [1].
  2. Replace the six(M2.5x4) screws that secure the display assembly to the system chassis [2].
    Image: Press the hinges down.
  3. Seat the system chassis on the display assembly.
    Image: removing the display assembly.
  4. Reroute the wireless antenna through the routing guides on the system board [1].
  5. Connect the eDP cable to the eDP connector on the system board [2].
  6. Place the eDP cable bracket on the system board [3].
  7. Replace the two (M2x3) screws that secure the eDP cable bracket to the system board [4].
    Image: installing the display assembly.

Next steps

  1. Replace the WLAN card.
  2. Replace the battery.
  3. Replace the base cover.
  4. Replace the microSD card.
  5. Follow the procedure in after working inside your computer.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\