Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell Latitude 5500 Service Manual

PDF

Removing the system board

Prerequisites

  1. Follow the procedure in before working inside your computer.
  2. Remove the microSD card.
  3. Remove the base cover.
  4. Remove the battery.
  5. Remove the memory module.
  6. Remove the WLAN card.
  7. Remove the coincell battery.
  8. Remove the DC-in .
  9. Remove the M.2 SSD.
  10. Remove the inner frame .
  11. Remove the heatsink.
  12. Remove the system fan.

Steps

  1. Push the dummy sim card out of the sim card slot [1, 2].
  2. Lift the latch and disconnect the following cables from the system board:
    1. LED board cable [3].
    2. USH FFC [4].
    3. Touchpad FFC [5].
    Removing the system board.
  3. Remove the two (M2x3) screws that secure the eDP bracket to the system board [1].
  4. Remove the eDP bracket away from the computer [2].
  5. Lift the eDP cable from the connector on the system board [3].
    Removing the system board.
  6. Remove the five (M2x3) screws that secure the system board to the palmrest [1].
  7. Lift the system board away from the computer [2].
    Removing the system board.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\