Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Latitude 7520 Service Manual

Installing the keyboard

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The following image indicates the location of the keyboard and provides a visual representation of the installation procedure.

Assemble the keyboard and plate.

Install the screws and connect the cable to touchpad module.

Steps

  1. Align and place the keyboard on the keyboard support plate and secure it using the two (M2x2) screw.
  2. Replace the keyboard assembly in to its slot in the computer.
  3. Connect the keyboard FPC and keyboard backlight FPC to the touchpad module.
  4. Replace the 20 (M1.6x1.7) screws that secure the keyboard assembly to the computer.
  5. Adhere the LED board FFC, USH board FFC , touchpad FFC and, SmartCard reader FFC to the back of the keyboard.

Next steps

  1. Install the I/O board.
  2. Install the system board.
  3. Install the audio board.
  4. Install the speaker board.
  5. Install the heatsink assembly.
  6. Install the battery.
  7. Install the WWAN card.
  8. Install the solid-state drive.
  9. Install the base cover.
  10. Install the microSD card.
  11. Follow the procedure in after working inside your computer.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\