Dell EMC OpenManage Enterprise Power Manager Version 1.2 User’s Guide

Add devices to Power Manager

To collect and monitor power and thermal utilization, and airflow data of devices, add the devices in Power Manager.

1. Launch OpenManage Enterprise, and then click Plugins > Power Management > Power Manager Devices.
   The Power Manager Devices tab is displayed.
2. Click Individual Devices > Add device(s).
   The Add Devices to Power Manager page is displayed.
3. View all the devices that are discovered in OpenManage Enterprise by expanding the SYSTEM GROUPS section on the left side and in the All Devices tab, select the devices that you want to add.
4. (Optional) To filter and view the data:
   1. Click Advanced Filters.

   The following filters are displayed:

   • Health State
   • Power State
   • Connection State
   • Name
   • Identifier
   • Model
   • Type
   • Managed State
5. To clear the filters, click Clear All Filters.
6. To view the selected devices, click Selected Devices tab.
7. To add the devices, click Add Selected.
   All the devices added individually to Power Manager are displayed on the Individual Devices tab along with the total count of devices that are added to Power Manager.

   All the individual devices and devices that are part of the selected group, are added to Power Manager, and are displayed on the All Monitored Devices tab along with the total count of devices.