OptiPlex 3000 Small Form Factor Service Manual

Removing the memory

1. Carefully spread apart the securing-clips on each end of the memory-module slot.
2. Grasp the memory module near the securing clip, and then gently ease the memory module out of the memory-module slot.
   CAUTION:To prevent damage to the memory module, hold the memory module by the edges. Do not touch the components on the memory module

   NOTE:Repeat step 1 to step 2 to remove any other memory modules installed in your computer.

   NOTE:Note the slot and the orientation of the memory module in order to replace it in the correct slot.