OptiPlex 3050 Tower Owner's Manual

Removing 3.5–inch hard drive

1. Follow the procedure in Before working inside your computer.
2. Remove the:
   1. cover
   2. bezel
3. NOTE:All pictures shown are for illustration purposes only. Actual product may vary depending on product model, configuration, features and/or product enhancements.
   To remove the hard drive assembly:
   1. Disconnect the SATA cable and the power cable from the connectors on the hard drive.
      
   2. Remove the screws that secure the hard drive to the chassis [1] and open the front panel door [2].
      
   3. Slide the hard drive out from the chassis.