The system administrator can anyone of the following options, available in the left pane:
To disable a specific day, set all the hour and minute fields in that template to 0 (zero).
NOTE: To disable this setting, set the Hours and Minutes the same as Set the time to resume normal power/charge operation Hours and Minutes.
To lock the time to operate on AC power without charging the battery:
Set Hours: 0-23
Set Minutes: 0, 15, 30, 45
NOTE: This setting is disabled if the time is not set within the Operate on battery power only and Resume normal power/charge operation period.
To lock the time to resume normal power or charge operation:
Set Hours: 0-23
Set Minutes: 0, 15, 30, 45
To set a range for the threshold limits, enter the Minimum (1 - 100) and Maximum (Minimum - 100) values. If a minimum or maximum limit is not within the minimum or maximum capabilities, the minimum or maximum limit of the client system is used.
NOTE: If invalid values are set, the system uses default values.
NOTE: If selected minimum or maximum limits are not within the minimum or maximum capabilities, the minimum or maximum limit of the client system is used.
Typical uses for these settings are:
Set the minimum and maximum threshold limits, and leave the Threshold value field blank. The sets a limit for the range, but allows the threshold value to be modified in the UI.
Set Threshold value and leave the Minimum threshold limit and Maximum threshold limit blank. This value is locked and cannot be modified in the UI.