Each NIC on the back of the system has indicators
that provide information about the activity and link status. The activity
LED indicator indicates if data is flowing through the NIC, and the
link LED indicator indicates the speed of the connected network.
Table 1. NIC indicator
codesThe NIC indicators table describes different NIC
indicator codes and condition of the connectivity.
NIC indicator codes
Condition
Link
and activity indicators are off.
Indicates that the NIC is not connected to the network.
Link
indicator is green, and activity indicator is blinking green.
Indicates that the NIC is connected to a valid network at its maximum port speed, and data is being sent or received.
Link
indicator is amber, and activity indicator is blinking green.
Indicates that the NIC is connected to a valid network at less than its maximum port speed, and data is being sent or received.
Link
indicator is green, and activity indicator is off.
Indicates that the NIC is connected to a valid network at its maximum port speed, and data is not being sent or received.
Link
indicator is amber, and activity indicator is off.
Indicates that the NIC is connected to a valid network at less than its maximum port speed, and data is mot being sent or received.
Link indicator is blinking green, and activity
is off.
Indicates that the NIC identify is enabled through the NIC configuration utility.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\